PVA Adhesives

General purpose and specific usage products for bonding porous surfaces.

Hot Melt Adhesives

In granular, block and glue stick forms suitable for jet, wheel, extrusion and spray applications.

Click here for info on adhesives
Click here for info on bulk adhesives

Casco UF and MUF Resin Systems

In powder or liquid forms for structural, laminating and veneering.

Click here for more Info

Contact Adhesives

A comprehensive range of specialist products suitable for bonding porous and non-porous materials.

Resorcinol Adhesive Systems

Structural timber bonding adhesive system for external uses. Water resistant.

Click here for more info

Polyurethane

The new generation of adhesives, available in liquid and hot melt forms.

Acrylics

Specialised water based adhesives for bonding difficult surfaces including some lacquers and printed surfaces

Cyanoacrylate & Anaerobic Adhesives

A full range of structural and engineering adhesives.

Click here for more info

Sealants and Panel Adhesives

AdCo offer a comprehensive range of traditional, and modern high-tech sealants and panel adhesive, in bulk and cartridge forms.

Sta'-Put

AdCo (UK) Ltd are pleased to introduce to the UK market, a new concept, which will revolutionise the application of contact adhesive, both at the work place and also on-site.

The specially formulated high-tech polymer adhesives are supplied in pressured containers. Simply by fixing the Sta'-Put hose and gun to the container you are ready to apply adhesive within seconds. It is as easy as that.

The system is always ready to go, and there is no clean down of equipment each time after use. When one container is empty, simply remove and screw on a new one, the empty container is disposable. The only tool required is a spanner.

The Sta'-Put system is more cost effective in use than other methods of hand applying contact adhesives.

The Sta'-Put application adhesive system requiring no electricity or compressed air.

The non-flammable adhesive formulations have been specially developed to meet the high demands of industry, and offer the following benefits:

• Heat Resistance up to 104°C
• Non atomising spray. No air born particle contamination. Very low odour
• Rapid coverage rates
• Cost effective. Cheaper than hand applied contact adhesive
• Fast bonding. 2 minute minimum open time, but has an open time of up to 24hrs
• Suitable for bonding such materials as:- timber, metals, rubbers, glass, high pressure laminates, polyurethane foams, veneer, most plastics, insulation materials and fabrics. Sta' Put II has been specially formulated for use on polystyrene

Glue Dots

But we also know that that you love to challenge us – do you have a sticking application where you would like to use FASTfixers, but you need something special? Just ask and we’ll put our wide technical know-how and innovative skills to the test to engineer your solution. (may be subject to minimum quantity) FASTfixers™.

Made in the EU to ISO9002 standards

Casco UF and MUF Resin Systems

AdCo are the official distributors for the full range of Urea Formaldehyde, (UF),and Melamine Formaldehyde, (MUF), resin systems, manufactured by Casco Adhesives for use in timber bonding industries including joinery, furniture assembly and veneering.

Developed over many years and using the latest manufacturing techniques the Casco systems are characterised by the following: Liquid / liquid Systems Low formaldehyde content Easy and quicker to mix Extended pot and spreader life Fast pressing times Easy clean down Cost effective Radio frequency curable Cleaner running in use Safer in use Complies with a variety of International Standards Please make direct contact with your technical department to discuss your own particular requirements and production parameters.

Surebond FastForm Powdered UF Resins

The FastForm powdered resins, are easily mixed with water to produce a high performance structural adhesive for timber and panel laminating operations within

• General Joinery
• Cabinet Making
• Shop-fitting
• Boat Building

Surebond FastForm has the following advantages: -

• Simple mixing with water
• Gap filling
• High water resistance
• Reduced wastage
• Non staining
• Mould resistant
• Stronger bond than wood itself

There are currently two grades in the FastForm range.

• FastForm W, a general purpose grade for use all the year around
• FastForm S, a slower setting trade, often used during the summer or in hot climates.

FastForm W & S both meet BS EN204 Durability Class D3, and BS EN 302-1 A3 Type II performance specifications

After mixing with water, FastForm grades give the following gel times: -

Setting speeds can be accelerated with the use of Surebond FL10 separate application hardener.

Surebond FastForm Resins are available in 25kg sacks, 2.5kg & 2.5kg &5.0Kg pails, and 50 gram sachets.

Casco Phenol Resorcinol Formaldehyde (PRF) Adhesives Systems.

Casco Phenol Resorcinol Formaldehyde (PRF) Adhesives Systems. AdCo distribute the full range of Casco’s Phenol Resorcinol Formaldehyde (PRF) adhesives, which are predominately used for finger jointing, glulam, stressed structural beam construction and marine applications.

PRF’s are classed as thermosetting polymers and when cured will give very high weather, water and humidity resistance for interior or exterior uses.

These 2 part systems can be cold or hot pressed and also radio frequency cured. Casco’s PRF system are tested and approved to the majority of International Standards.

For further information please contact our Technical Department to discuss your particular requirements.

Cyanoacrylate & Anaerobic Adhesives

Procure consists of a range of premier technology instant adhesives packaged in user friendley bottles in 3 standard sizes 20g 50g and 500g.

Thread locking
Screwlock, nutlock, studlock we have a complete range of threadlockers to suit every application.

Retaining range
Anaerobic retainers are covered by six grades of various strength & viscosities .

Gasketing range
High strength, flexible & general purpose anaerobic gasket makers are available .

Sealing range
A comprehensive range of Hydraulic & pipe sealants available.

Cyanoacrylates
Over 30 grades of high quality cyano available in this prestigious range available to cyanotec.

Activators, Primers & Cleaners
A full range of cyano & anaerobic activators supplemented by a cyano de-bonder, polyofin primer plus a safety cleaner/degreaser.

Uv range
From Glass bonding to medical device technology we have a complete range of UV adhesives.

Structural Adhesives
Epoxy & structural acrylics available.

The premier wood bonding system for the kitchen and bedroom fitter and many other uses. Mitre mate will bond most types of wood (except oily hard wood) in under 30 seconds removing the need for clamps or other holding devices. The bond is usually stronger than the wood so any type of joint can be bonded with confidence .

The product is packed as a kit adhesive and activator in the correct proportions for most applications .

The 3 step system
1 - Spray activator to one surface and allow to dry (10 secs).
2 - Apply enough adhesive to the other surface.
3 - Hold together for 30 seconds .

If you need more time to align the joint Mitre Mate adhesive can be used alone. This will allow more time to assemble the parts but it will still cure in under 5 minutes.

Mitre Mate kits are packaged in convenient point of sale display boxes and are supplied in 2 sizes:
Mitre Mate Classic: 50g adhesive & 200ml activator
Mitre Mate Max: 100g adhesive & 400ml activator